|
1. Cut out
pieces and fold as shown. Remember to fold
against a metal straight-edge in order to
get the best creases. |
|
2. Glue the
two corner tabs to the blank surface of the lid. |
|
3. Glue the 4
corner tabs to the blank surface of the box body. |
|
4. Splay
outward the 3 lining panels found on the lid
and slather with a thin coat of glue using
the artist's paint brush. Fold lining panels
back inward and make a nice flat bond
against the lid sides. Use a pair of
tweezers to press bond along crease. |
|
5. Splay
outward the 4 lining panels found on the box
body and slather with a thin coat of glue.
Fold lining panels back inward and make a
nice flat bond against the box's sides. Use
the tweezers to press bond along crease. |
|
6. Check fit
of lid lining rectangle, trim if necessary.
Glue into place. |
|
7. Check fit
of box lining rectangle, trim if necessary.
Glue into place. |
|
8. When all is
dry, fit lid onto box. Match stripes on lid
to box body. Glue the flap found on the end
of the box lid onto the outer surface of the
box body. |
|
9. Here's the
finished product! |